• +86 577-63660008
     

    The lube with proper viscosity is necessary before reduction gears is put into operation, reduction gears can give full play to its funtion when making gears less friction, meeting high load and shocking load

    It is necessary to drain off the lube after it is used about 200 hours for the first use, then fill lube to a height of middle of oil leveler after it is rinsed thoroughly, but higher location or lower location can cause higher temperature

    ( Please refer to manual of operation, and Mantenance for detailed operation process )

    The types recommended:

    Ludrication typeOilGreaseSpecial Lubricants
    Ambient Temperature℃+40 to 0+25 to -15+10 to -30-20 to -50+40 to -15-40 to +80-40 to +10
    ISO viscosity classVG220VG 150
    VG 100
    VG68-46
    VG32
    VG 22
    VG 15
     VG220VG32
    BP Energol
    GR-XP220
    BP Energol
    GR-XP100
    BP Energol
    GR-XP68
    BP Energol
    LPT22
     BP Energrease 
    HT-EP 00
     
      
    Mobilgear
    630
    Mobilgear
    629
    Mobil D.T.E
    15M
    Mobil D.T.E
    11M
    Mobilplex
    44
    Mobil
    SHC 630
    Mobil
    SHC 624
    Shell Omala
    Oil 220
    Shell Omala
    Oil 100
    Shell Tellus
    Oil T32
    Aero Shell
    Fluid 41
    Shell Grease
    S 3655
      

    Copyright ?2018 REDSUN TIMES GROUP All Right Reserved

    REDSUN TIMES GROUP Copyright

    National service hotline

    0+86 577-63660008

    白白se在线发布视频